NSK Bearing Manufactured NU312 TVPC3 Cylindrical Roller Bearing

Keywords:

Category:

Cylindrical Roller Bearings

WhatsApp:8618615202650

Email:admin@yokobearings.com

Email:

admin@yokobearings.com

Online consultation Related Products

NSK Bearing Manufactured NU312 TVPC3 Cylindrical Roller Bearing

Detail

Single row cylindrical roller bearing is usually only subject to radial force, compared with the ball bearing of the same size, the radial bearing capacity is increased by 1.5-3 times, good rigidity, impact resistance, it is especially suitable for rigid support, and support the short shaft, heat elongation caused by axial displacement of the shaft and the installation and disassembly of the machine accessories need separation type bearing.

Composition: single row cylindrical roller bearing, including outer ring, inner ring locking ring and cage.

Advantages: convenient assembly, large load bearing, high limit speed, strong reliability, long service life and other advantages.

Application: mainly used for large motor, machine tool spindle, engine front and rear support shaft, train and bus box shaft support, diesel engine crankshaft, automobile tractor gearbox, etc.

N type:
The inner ring has two integral flanges and the outer ring is without flanges. Axial displacement of the shaft with respect to the housing can be accommodated in both directions within the bearing itself. The bearings are therefore used as non-locating bearings.
NU type:
The outer ring of bearings of the NU design has two integral flanges and the inner ring is without flanges. Axial displacement of the shaft with respect to the housing can be accommodated in both directions within the bearing itself.
NJ type:
The outer ring has two integral flanges and the inner ring one integral flange. The bearings are therefore suitable for the axial location of a shaft in one direction.
NF type:
The outer ring has one integral flange and the inner ring two integral flanges.
NUP type:
The outer ring has two integral flanges and the inner ring one integral flange and one non-integral flange in the form of a loose flange ring. The bearings can be used as locating bearings, i.e. they can provide axial location for a shaft in both directions.
RN type:
No outer ring and the inner ring two integral flanges.
NN type:
NN type bearing without ribs on outer ring,there is a wall in the midel of between both sides of inner ring. It can make shaft relative bearing between the axial displacement generated in both directions.